How to fix a dead cell phone when the battery gauge is still at 50 percent

How to fix a dead cell phone when the battery gauge is still at 50 percent
How to fix a dead cell phone when the battery gauge is still at 50 percent

Cara Mengatasi Ponsel Mati Saat Indikator Baterai Masih 50 Persen

In this article, we will give our experience on the problem of a dead HP battery even though the battery indicator is still at 50 percent. Exactly this problem occurred when we just replaced our cell phone battery, and after that, the cell phone worked normally and the battery life was pretty good after we did the battery replacement.

However, the problems began to appear when the battery indicator was still at 50 percent and suddenly the cell phone died, and we took the initiative to recharge the battery, nothing happened after charging the battery, the cell phone continued to work normally and the battery charge indicator continued to work normally. .

Read More :   Various Tourism Trends in 2022, What is your Option?

However, after that the problem occurred again when we used the cell phone, when the battery was still at 40 percent of the HP it turned off again. Here we get confused and begin to find out what is the cause of this problem.

And in the end we found some solutions that are quite effective, and if you experience the same problem, you can also apply this method to deal with a cell phone that turns off when the battery indicator is still at 60, 50 percent, 40 percent. , 30 percent or 25 percent and other percentage figures.

1. Do a factory reset

If this issue occurs when you have just replaced the battery then the best solution you can do is to do a factory reset on your phone.

Read More :   Avoid buying stocks until the market slows down, warns Jim Cramer

But before doing factory reset (pabrik reset)Please back up your data first as this process will delete all the data on your phone.

Why do you need to do a factory reset? Because your phone’s operating system has a calibration sensor (calibration system), usually this system has a lot of problems if you replace the battery. This will give or display inaccurate (incorrect) battery information.

Reset Pabrik
How to fix a dead cell phone when the battery gauge is still at 50 percent 2

In this way, our problem is solved. Currently our phones are working normally again.

2. Perform battery calibration manually

We read this method from the forums, there are several users who experience the same problem when calibrating the battery manually, namely:

“Use your phone until it turns off, then recharge the battery to 100 percent, do this up to 3X.

Grades:

We have never used this method, if the first method has not worked. You can also try this method. Because of the forums we read, many users have been successful this way.