Vinyl flooring is one of the most affordable and durable options. There is no other type of flooring that can compare in its resistance to moisture.
It’s easy to install on your own, and you can often finish a smaller room in a day or two after working on it.
Installing vinyl flooring over a plywood base is the typical installation method. What are your options if you don’t want to remove your existing floor covering, even though you already have it installed?
Vinyl flooring can be installed over other types of floor coverings, such as tile.
Cover these flooring surfaces with vinyl tile.
Vinyl flooring can be installed over the following surfaces if the proper substrate is used:
solid wood floors
engineered wood flooring
Ceramic or Stone Tile
Commonly Completed Projects Involving Vinyl Flooring Renovation
Preparation is an important part of the job to be done, as is the case with many other types of renovation projects. When installing flooring, it is essential to properly prepare the base, also known as the substrate, to achieve a beautiful floor that will last for a long time.
It is much more important when working with thin floor coverings such as vinyl flooring.
When deciding whether or not to redo the flooring in your home, the one you have today serves as the “de facto substrate.”
Therefore, the conditions that are applicable to a conventional subfloor made of plywood are also applicable to this floor covering substrate.
Vinyl flooring over wood flooring
Vinyl flooring can be installed over engineered wood, solid wood, or other types of wood flooring. If the wood has a significant amount of gaps, the gaps will need to be filled first.
Also, solid wood floors that are fairly old can cup or swell over time. Due to this situation, installation directly on the wood would be a challenge.
To install this type of hardwood flooring, an intermediate base is required.
Vinyl flooring over laminate flooring
Vinyl flooring can sometimes be installed over laminate flooring as a subfloor. Laminate flooring, like hardwood flooring, can expand when it comes into contact with water. It may be essential to begin the repair process by focusing on areas with high moisture, such as the regions around the sink, dishwasher, and refrigerator.
Because floating laminate flooring is not attached to the subfloor, it is easy to remove if the need arises. If your floor is floating (not glued down), you will generally get better results removing the laminate flooring rather than putting vinyl on top. This is especially true if your flooring is already adhered.
Vinyl flooring over tile
If the grout lines between ceramic or porcelain tiles are extremely narrow, vinyl flooring can be laid directly on top of those floors. It is important to replace or repair broken or missing tiles.
Vinyl flooring may develop some minor indentations due to the wide seams that separate the tiles. Instead of laying the vinyl directly on the tile, it is better to use a primer in areas where the seams of the tile floor are very large or deep.
There are six considerations to keep in mind before installing vinyl over other floor coverings.
Vinyl flooring can, in most situations, be installed directly over an existing floor without a problem. In most cases, the subfloor covering material does not have intrinsic characteristics that prevent it from functioning as a substrate for the vinyl flooring above it.
Such subfloor covering may be used provided it possesses all the characteristics of a suitable substrate.
Keep in mind that vinyl flooring is not only flexible but also very thin and soft. Vinyl flooring is unable to efficiently cover or smooth out substrate defects in the same way that thicker, more rigid floor coverings can.
It is possible, for example, to bridge gaps, holes and seams in solid hardwood or engineered wood, and engineered wood can also smooth out the surface relief.
When vinyl flooring is used, each of these defects has the potential to transmit, or telegraph, to the layer of vinyl flooring above it. Even more concerning is the possibility that vinyl flooring will eventually develop craters in areas where there are large gaps.
Before installing vinyl flooring, it is common practice to first lay down a base made of large-format boards as a substrate. Examples of suitable substrates include plywood with a thickness of 1/4 inch and dimensions of 4 feet by 8 feet, as well as sheets of MDF particle board.
In addition to the subfloor, this substrate will be installed. Large format underlayment sheets are a great option for vinyl flooring as they can bridge surface embossing and pinholes, have few seams and add some extra strength.
Strong and reliable in all aspects
It is easier for the installer to assess the condition of the subfloor once the floor coverings have been removed. If the old floor covering is not removed, it is impossible to determine if the subfloor is fractured, has deteriorated, or is otherwise not in excellent overall shape.
Verify that the installed floor covering, subfloor, and any potential subfloor are strong enough to support the vinyl flooring installation.
Floors without joints or with closely spaced seams
Large format boards offer an installation surface that contains few seams due to its size. If we take the example of a kitchen floor that is 16 feet long and 12 feet wide, we would need to use six subfloor boards. This would result in only a few seams.
On the other hand, a solid wood floor used as a substrate can contain hundreds of seams. If the wood floor in question has other problems, such as large gaps between the floor boards (which are often the result of water damage), then it is not an appropriate substrate to install vinyl flooring on.
There are no holes or any other flaws on it.
Both high places and low regions of the substrate should be sanded and filled, respectively.
While minor defects may not be immediately visible on the surface of vinyl flooring, they may become visible over time in the form of small craters or hills that gradually emerge on the surface.
Very little or no relief
Surface embossing is one of the desirable aesthetic aspects that can be found in various types of tile, laminate, and vinyl.
Whether it’s to help the floor covering look more genuine (like the material they’re copying, like wood) or simply to enhance its appearance, embossing creates very subtle highs and lows that give a three-dimensional effect.
A heavy emboss has the potential to telegraph its way into the vinyl flooring surface over time. In most cases, this does not apply to vinyl flooring thicker than 6.5 millimeters; however, it could be the case for thinner boards measuring 3.5 millimeters or less.
When applied to a surface with a lower texture, the thin vinyl will pick it up immediately and transmit it to the surface.
Moisture free underneath
Since there is no way for moisture to evaporate, mold and mildew can form if moisture is allowed to become trapped between vinyl flooring and its substrate. Before installing vinyl flooring over freshly poured concrete floors, the concrete must be completely cured and dry.
height that is acceptable
When laying one type of flooring on top of another type of flooring, the problem of height always arises. If the old version was at a height that can be considered acceptable, will the new one that is taller be unacceptable?
One of the best alternatives in this regard is to use vinyl flooring as the top layer since, compared to other types of flooring, it provides considerably less height.
LVP comes in a variety of board widths, all of which are widely available, allowing you to get the most accurate hardwood look possible. Oaks, walnuts and exotic species are just some of the beautiful woods that can be found. Options for textured surfaces include beveled edges.
SD Wood Cabinet vinyl plank flooring in San Diego has a wide range of colors and patterns to choose from. Our collection is continually updated and includes the latest trends.